Wuchang WHJQ series intelligent shearing pump can be equipped with a linkage automatic control system, which has the function of automatic start and stop control. It is mainly a kind of mud treatment equipment specially used for shearing polymer and clay and has been used on-site to prove effective. In the drilling fluid solids control circulation system, the polymer or clay should be fully sheared in advance before entering the drilling fluid solids control circulation system in order to give full play to its effectiveness and improve the performance of the drilling fluid. In the first cycle, equipment such as vibrating screens may be blocked, a large amount of polymer may be lost, and drilling costs may be increased, and large-sized solid particles in the drilling fluid may become hard and difficult to remove. Wuchang shear pump provides users with a new type of special equipment designed for rapid configuration and processing of mud, which can meet the requirements of users for configuring high-performance mud. The shear pump can effectively mix and fully hydrate the materials added in the drilling fluid, save the use of mud materials, shorten the mud configuration time, and provide good mud performance for the drilling process. It is an efficient mud mixing drilling fluid solids control equipment.

The function of the shear pump:

1. The shear pump can greatly improve the hydration degree of bentonite particles.
The degree of dispersion and hydration of bentonite particles in water depends on: electrolyte content in water, time, temperature, number and concentration of replaceable cations on the surface. Under the same other conditions, the use of shear pump can save more than 30% of bentonite.
2. The shear pump can dilute and hydrate the polymer or clay as soon as possible.
The high molecular weight polymer used in the mud has a relatively high molecular weight and is not easy to hydrate. Therefore, the high molecular polymer needs to be pre-sheared. The shear pump can provide high shear efficiency and accelerate the dilution and hydration process of the polymer.
3. The shear pump can provide higher displacement and head, which can meet the requirements of preparing and processing mud.
Shearing pump is a new type of special equipment to provide rapid preparation and treatment of mud, which can meet the requirements of users for preparing high-performance mud. Under the fierce competition in the drilling market, shortening the mud preparation time means speeding up the drilling progress, which will bring good economic benefits to drilling companies.

Technical parameters of shear pump:

Features of Shear Pump:

1. Wuchang intelligent shearing pump can be equipped with a linkage automatic control system, which has the function of automatic start and stop control.

2. Both the pump casing and the impeller are made of wear-resistant alloy ductile iron, which has higher wear resistance and longer service life.

3. The main shaft is equipped with high-quality alloy mechanical seals to prevent the sand pump from leaking and reduce the maintenance time of the pump

4. Shear pump is a centrifugal pump designed for users to quickly configure drilling mud, which can meet the user's requirements for configuring high-performance mud.

5. The shear pump can effectively mix and fully hydrate the materials added in the drilling fluid, save the use of mud materials, shorten the mud configuration time, and speed up the drilling speed.

6. The shear pump can shorten the dilution and hydration time of the polymer.

7. The shear pump can provide high shear efficiency, speed up the dilution and hydration process of the polymer, thereby improving the quality and efficiency of the slurry.